Raspberry + Octoprint + Klipper баги

Ушел вечером - принтер был в рабочем состоянии

Пришел с утра - получил такое

The OctoPrint server is currently not runningIf you just started up your Raspberry Pi, please wait a couple of seconds, then try to refresh this page.If the issue persists, please log into your Raspberry Pi via SSH and check the following:    Verify that the process is running: ps -ef | grep -i octoprint | grep -i python should show a python process:    pi@octopi:~ $ ps -ef | grep -i octoprint | grep -i python    pi 1441 1 6 11:12 ? 00:00:15 /home/pi/oprint/bin/python    /home/pi/oprint/bin/octoprint --host=127.0.0.1 --port=5000    If it isn't, the question is why. Take a look into ~/.octoprint/logs/octoprint.log, there might be an error logged in there that helps to determine what's wrong.    You might also want to try if you can restart the server (if no obvious error is visible): sudo service octoprint restart.If all that doesn't help to trouble shoot the issue, you can seek support on the OctoPrint Community Forum. Please provide your OctoPi and OctoPrint versions as well as your octoprint.log and explain what you already tried and observed as detailed as possible.

SSH работает и подключается, версия Питона 3,7,3

В логе~/.octoprint/logs/octoprint.log  вообще ничего нет - пустой файл

На команду ps -ef | grep -i octoprint | grep -i python не реагирует

Нужен совет - что с этим делать без переставления системы

С Линуксом работал, но чисто как пользователь - на память все команды не помню )