концевики на mks sbase 1.3

Добрый день.

Принтер Tevo Black Widow.

Концевики[IMG]https://www.google.ru/url?sa=i&rct=j&q=&esrc=s&source=images&cd=&cad=rja&uact=8&ved=0ahUKEwiH35Wa9MDXAhWFC5oKHZP_CSQQjRwIBw&url=https%3A%2F%2Fwww.reddit.com%2Fr%2FReprap%2Fcomments%2F58sh7y%2Fi_noticed_this_on_tevo_blackwidow_its_a_suenw%2F&psig=AOvVaw1DInLTer5YIkdEDuggbDO2&ust=1510846563266773[/IMG]Подключаю Mks sbase 1.3.

Все работает: нагрев сопла, стола, движения все верные и в нужных направлениях, даже управление скоростью обдува легко заработало после конфигурации smootieware. Концевик же работает только по X, по Y и по Z, горят диоды на концевиках, как будто они уже в home пришли, при комманде home идут пару мм в сторону от home.

Перебрал вроде все комбинации, не знаю в чем дело.

Кто подскажет?

Прикрепляю код по конфигурации концевиков (на пинах все они на правильных сидят):

## Endstops

# See http://smoothieware.org/endstops

endstops_enable true # The endstop module is enabled by default and can be disabled here

#corexy_homing false # Set to true if homing on a hbot or corexy

alpha_min_endstop 1.24!^ # Pin to read min endstop, add a ! to invert if endstop is NO connected to ground

#alpha_max_endstop 1.25^ # Pin to read max endstop, uncomment this and comment the above if using max endstops

alpha_homing_direction home_to_min # Or set to home_to_max and set alpha_max and uncomment the alpha_max_endstop

alpha_min 0 # This gets loaded as the current position after homing when home_to_min is set

alpha_max 200 # This gets loaded as the current position after homing when home_to_max is set

beta_min_endstop 1.26!^ # Pin to read min endstop, add a ! to invert if endstop is NO connected to ground

#beta_max_endstop 1.27^ # Pin to read max endstop, uncomment this and comment the above if using max endstops

beta_homing_direction home_to_min # Or set to home_to_max and set alpha_max and uncomment the alpha_max_endstop

beta_min 0 # This gets loaded as the current position after homing when home_to_min is set

beta_max 200 # This gets loaded as the current position after homing when home_to_max is set

gamma_min_endstop 1.28!^ # Pin to read min endstop, add a ! to invert if endstop is NO connected to ground

#gamma_max_endstop 1.29^ # Pin to read max endstop, uncomment this and comment the above if using max endstops

gamma_homing_direction home_to_min # Or set to home_to_max and set alpha_max and uncomment the alpha_max_endstop

gamma_min 0 # This gets loaded as the current position after homing when home_to_min is set

gamma_max 200 # This gets loaded as the current position after homing when home_to_max is set

alpha_max_travel 400 # Max travel in mm for alpha/X axis when homing

beta_max_travel 300 # Max travel in mm for beta/Y axis when homing

gamma_max_travel 300 # Max travel in mm for gamma/Z axis when homing